page contents
Sale!

Bestgle 300W Mini Heat Gun for Embossing, Multi-purpose Hot Air Gun Heat Tool, Heat Shrink Gun DIY Crafts

£39.99 (as of February 3, 2018, 00:24) & FREE Shipping. Details £16.19

Made of high quality ABS plastic outside and stainless steel inside, simple and durable. New US standard, not required voltage converter any more.
Dimension: 240*50mm / 9.44*1.97in. Voltage:110V. The left and right sides have a heat sink, the internal temperature of the hot air gun is reduced, and the service life is prolonged.
The temprature can not be adjusted, but it can reach at about 200°C / 390°F within a few seconds abstractly which heat up quickly and works like a charm. And do not use it more than 10 minutes in one time, just turn off then turn on for working continuously.

Usually ships in 24 hours

Description


With Bestgle Hot Air Gun
100% Brand New and High Quality
Can be used to heating relief powder and shrinkable sheet
Keeping 3-5cm distance from work and about a 45 degree angle to heat until it is completed.
After completion, use the heat gun at high temperature to blow a few seconds
It not only can add its hardness, but also its brightness
The temperature can not adjustable, in theory, it can reach at 200 degree within a few seconds
Do not work over 10 minutes, blow at 45 degree angle to avoid heat suck
Be careful when using the hot air gun

FEATURE:
Color: Black
Material: ABS
Size: 240*50mm / 9.44*1.97in, wire length 140cm
Type: Constant temperature
Working temperature: It can reach at about 200°C / 390°F within a few seconds
Rated power: 300W
Power type: AC power supply
Rated voltage:110v
Power:50-60Hz
Working time: 8 minutes

Usage:
1.Plug in the heat tool
2.Hold the gun but do not touch the hot nozzle
3.Keep 5-6cm distance between the heat gun and your work, about 45° for heating until the completion of the work
4.Turn off the power to stay cool

Notes:
1.This kind of gun can not adjust the temperature but it heats up quickly at about 200℃ theoretically.
Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.
2. This heat gun is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.

Packing details:
1*Hot Air Gun
1*Detailed Instructions
Made of high quality ABS plastic outside and stainless steel inside, simple and durable. New US standard, not required voltage converter any more.
Dimension: 240*50mm / 9.44*1.97in. Voltage:110V. The left and right sides have a heat sink, the internal temperature of the hot air gun is reduced, and the service life is prolonged.
The temprature can not be adjusted, but it can reach at about 200°C / 390°F within a few seconds abstractly which heat up quickly and works like a charm. And do not use it more than 10 minutes in one time, just turn off then turn on for working continuously.
Easy to use. Just keep 5-6cm distance from your amazing work and to heat it at about a 45 degree angle until completed. With the 45 degree it can avoid heat suck.
This excellent compact heat gun can be used for heating shrinkable film, embossed powder,rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.

Additional information

Binding

Brand

Color

EAN

EANList

Label

Manufacturer

Model

MPN

PackageDimensions

PackageQuantity

PartNumber

ProductGroup

ProductTypeName

Publisher

Size

Studio

UPC

UPCList

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.